Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 173/970
IP Address: The IP address of stations that are allowed to make configuration changes to
the Switch.
6.3.1.3 mtu
This command sets the maximum transmission unit (MTU) size (in bytes) for physical and
port-channel (LAG) interfaces. For the standard implementation, the range of <1518-9216> is a
valid integer between 1518-9216.
Syntax
mtu <1518-9216>
no mtu
<1518-9216> - Max frame size (Range: 1518 - 9216).
no - This command sets the default maximum transmission unit (MTU) size (in bytes) for
the interface.
Default Setting
1518
Command Mode
Interface Config
6.3.1.4 interface vlan
This command is used to enter Interface-vlan configuration mode.
Syntax
To Next Page
Loading...
Need help?
General
