Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 233/970
no - This command sets the Force Protocol Version parameter to the default value, that is,
mstp.
Default Setting
mstp
Command Mode
Global Config
6.4.2.5 spanning-tree forward-time
This command sets the Bridge Forward Delay parameter to a new value for the common and
internal spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the
value being greater than or equal to "(Bridge Max Age / 2) + 1".
Syntax
spanning-tree forward-time <4-30>
no spanning-tree forward-time
<4-30> - forward time value (Range: 4 – 30).
no - This command sets the Bridge Forward Delay parameter for the common and internal
spanning tree to the default value, that is, 15.
Default Setting
15
Command Mode
Global Config
6.4.2.6 spanning-tree hello-time
This command sets the Hello Time parameter to a new value for the common and internal
spanning tree. The hellotime value is in whole seconds within a range of 1 to 10 with the value
being less than or equal to "(Bridge Max Age / 2) - 1".
To Next Page
Loading...
Need help?
General
