Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 533/970
all - this command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Neighbor Addr: This field displays the IP Address of the neighbor on an interface.
Interface: Valid slot and port number separated by forward slashes.
Up Time: This field indicates the time since this neighbor has become active on this
interface.
Expiry Time: This field indicates the expiry time of the neighbor on this interface.
8.4.2 Configuration Commands
8.4.2.1 ip pimdm
This command enables the administrative mode of PIM-DM in the router.
Syntax
ip pimdm
no ip pimdm
no - This command disables the administrative mode of PIM-DM in the router. IGMP must
be enabled before PIM-DM can be enabled.
Default Setting
Disabled
Command Mode
Global Config
8.4.2.2 ip pimdm mode
This command sets administrative mode of PIM-DM on an interface to enabled.
To Next Page
Loading...
Need help?
General
