QUANTA LB4M User Manual

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 608/970
Syntax
ipv6 rip passive-interface
no ipv6 rip passive-interface
no - This command sets the RIPng timer to default value.
Default Setting
disable
Command Mode
Interface mode
9.6 DHCPv6 Commands
This section describes the command you use to configure the DHCPv6 server on the system
and to view DHCPv6 information.
9.6.1 Show Commands
9.6.1.1 show ipv6 dhcp
This command displays the DHCPv6 server name and status.
Syntax
show ipv6 dhcp
Default Setting
None
Command Mode
Privileged Exec
Display Message
DHCPv6 is Enabled (Disabled) Shows the status of the DHCPv6 server.
Server DUID: If configured, shows the DHCPv6 unique identifier

QUANTA LB4M Specifications

General

Brand	QUANTA
Model	LB4M
Category	Switch
Language	English