Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 306/970
<voice-name>]
no voice-vlan {mac <mac-address>mask <mac-mask>|name <voice-name>| all}
<mac-address> - Configs voice vlan mac address.
<mac-mask> - Configs voice vlan mac mask.
<priority-id> - Configs voice vlan priority.
<voice-name> - Configs voice vlan name.
no - This commandcancels the Voice VLAN configuration of this VLAN.
Default Setting
None
Command Mode
Global Config
6.11.2.4 voice vlan
This command is used to enable/disable Voice VLAN Admin Mode.
Syntax
voice vlan
no voice vlan
no - This command disables the Voice VLAN capability on this switch.
Default Setting
Disabled
Command Mode
Global Config
6.11.2.5 voice vlan (Interface Config)
To Next Page
Loading...
Need help?
General
