EasyManua.ls Logo

QUANTA LB4M - Macfilter Addsrc

QUANTA LB4M
970 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 339/970
Syntax
macfilter <macaddr> <1-3965>
no macfilter <macaddr> <1-3965>
<macaddr> - Specified a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
no - This command removes all filtering restrictions and the static MAC filter entry for the
MAC address <macaddr> on the VLAN <vlanid>.
Default Setting
None
Command Mode
Global Config
6.16.2.2 macfilter addsrc
This command adds the interface to the source filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as
a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter
must identify a valid VLAN.
Syntax
macfilter addsrc <macaddr> <1-3965>
no macfilter addsrc <macaddr> <1-3965>
<macaddr> - Specified a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
no - This command removes a port from the source filter set for the MAC filter with the
MAC address of <macaddr> and VLAN of <vlanid>.
Default Setting
None
Command Mode
Interface Config

Table of Contents

Related product manuals