QUANTA LB4M - Port-Security Mac-Address Move; Port-Security Violation Shutdown

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 291/970
Default Setting
None
Command Mode
Interface Config
6.8.6.5 port-security mac-address move
This command converts dynamically locked MAC addresses to statically locked addresses.
Syntax
port-security mac-address move
Default Setting
None
Command Mode
Interface Config
6.8.6.6 port-security violation shutdown
This command configures the port violation shutdown mode. Once the violation happens, the
interface will be shutdown.
Syntax
port-security violation shutdown
no port-security violation
no - This command restore violation mode to be default.
Default Setting