Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 615/970
Use this command from Global Config mode to enter IPv6 DHCP Pool Config mode. Use the
exit command to return to Global Config mode. To return to the User EXEC mode, enter
CTRL+Z. The <pool-name> should be less than 31 alpha-numeric characters. DHCPv6 pools
are used to specify information for DHCPv6 server to distribute to DHCPv6 clients. These
pools are shared between multiple interfaces over which DHCPv6 server capabilities
areconfigured.
Syntax
ipv6 dhcp pool <pool-name>
no ipv6 dhcp pool
<pool-name>
Default Setting
None
Command Mode
Global Config
9.6.2.7 domain-name(IPV6)
This command sets the DNS domain name which is provided to DHCPv6 client by DHCPv6
server. DNS domain name is configured for stateless server support. Domain name consist of
no more than 31 alpha-numeric characters. DHCPv6 pool can have multiple number of domain
names with maximum of 8.
Syntax
To Next Page
Loading...
Need help?
General
