Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 230/970
None
Command Mode
Privileged Exec
Display Message
Bridge Priority: Configured value.
Bridge Identifier: The bridge ID of current Spanning Tree.
Bridge Max Age: Configured value.
Bridge Hello Time: Configured value.
Bridge Forward Delay: Configured value.
Bridge Hold Time: Minimum time between transmission of Configuration Bridge Protocol
Data Units (BPDUs).
6.4.2 Configuration Commands
6.4.2.1 spanning-tree
This command sets the spanning-tree operational mode to be enabled.
Syntax
spanning-tree
no spanning-tree
no - This command sets the spanning-tree operational mode to be disabled. While
disabled, the spanning-tree configuration is retained and can be changed, but is not
activated.
Default Setting
Disabled
Command Mode
Global Config
6.4.2.2 spanning-tree protocol-migration
This command enables BPDU migration check on a given interface. The all option enables
BPDU migration check on all interfaces.
To Next Page
Loading...
Need help?
General
