Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 759/970
Slot/Port - Selects the interface to be configured.
Configurable Data
Port Security - Enables or disables the Port Security feature for the selected interface.
Maximum Number of Dynamically Learned MAC Addresses Allowed
-
Sets the
maximum number of dynamically learned MAC addresses on the selected interface.
Add a static MAC address- Adds a MAC address to the list of statically locked MAC
addresses for the selected interface.
VLAN ID- Adds a corresponding VLAN ID for the MAC Address being added to the list of
statically locked MAC addresses for the selected interface.
Maximum Number of Statically Locked MAC Addresses Allowed - Sets the maximum
number of statically locked MAC addresses on the selected interface.
Enable violation traps- Enables or disables the sending of new violation traps
designating when a packet with a disallowed MAC address is received on a locked port.
Enable violation Shutdown- Enables or disables the Port Security Violation Shutdown
mode for the selected interface.
Clear Dynamically Learned MAC Addresses - Clears the Dynamic MAC addresses of
the selected interface.
Command Buttons
Submit - Applies the new configuration and causes the changes to take effect. These
changes will not be retained across a power cycle unless a save configuration is
performed.
Move - Convert a dynamically locked MAC address to a statically locked address. The
Dynamic MAC address entries are converted to Static MAC address entries in a
numerically ascending order till the Static limit is reached.
To Next Page
Loading...