Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 119/970
Command Mode
Privileged Exec
Display Message
Admin Mode: This indicates whether or not IGMP Snooping is active on the switch.
Multicast Control Frame Count: This displays the number of multicast control frames that
are processed by the CPU.
Interfaces Enabled for IGMP Snooping: This is the list of interfaces on which IGMP
Snooping is enabled.
Vlan Enabled for IGMP Snooping: This is the list of interfaces on which IGMP Snooping is
enabled.
6.2.6.1.2. show ip igmp snooping mrouter
This command displays information on statically configured and dynamically learned multicast
router ports or multicast router configuration.
Syntax
show ip igmp snooping mrouter [ { vlan <vlanid> | interface [slot/port] } ]
<vlanid> - VLAN ID (Range: 1 – 3965).
slot/port - The interface number.
Default Setting
None
Command Mode
Privileged Exec
Display Message
VLAN: This display VLAN ID value.
Type: This displays the type of multicast group (Dynamic/Static).
Member Port: The interface number.
When using ’show ip igmp snooping mrouter interface [slot/port]’.
VLAN ID: This displays VLAN ID value.
Slot/Port: The interface number.
Multicast Router Attached: This displays if the interface is enabled as a multicast router
port.
To Next Page
Loading...
Need help?
General
