Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 228/970
Port Path Cost: The configured path cost for the specified interface.
Designated Root: Identifier of the designated root for this port within the CST.
Designated Port Cost: Path Cost offered to the LAN by the Designated Port.
Designated Bridge: The bridge containing the designated port.
Designated Port Identifier: Port on the Designated Bridge that offers the lowest cost to the
LAN.
Topology Change Acknowledgement: Value of flag in next Configuration Bridge Protocol
Data Unit (BPDU) transmission indicating if a topology change is in progress for this port.
Hello Time: The hello time in use for this port.
Edge Port: The configured value indicating if this port is an edge port.
Edge Port Status: The derived value of the edge port status. True if operating as an edge
port; false otherwise.
Point To Point MAC Status: Derived value indicating if this port is part of a point to point
link.
CST Regional Root: The regional root identifier in use for this port.
CST Port Cost: The configured path cost for this port.
This command displays the settings of one or all ports within the specified multiple spanning
tree instance. The parameter <0-4094> indicates a particular MST instance. The parameter
{<slot/port> | all} indicates the desired switch port or all ports.
If 0 (defined as the default CIST ID) is passed as the <0-4094>, then the status summary is
displayed for one or all ports within the common and internal spanning tree.
Syntax
show spanning-tree mst port summary <0-4094> {<slot/port> | all}
<0-4094> - multiple spanning tree instance ID.
<slot/port> - is the desired interface number.
all - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
MST Instance ID: The MST instance associated with this port.
Interface: The interface being displayed.
STP Mode: Indicate STP mode.
To Next Page
Loading...
Need help?
General
