Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 681/970
11.2.1.9.8. Removing Specific File Page
Delete files in flash. If the file type is used for system startup, then this file cannot be deleted.
Configurable Data
Configuration File - Configuration files.
Runtime File - Run-time operation codes.
Script File - Configuration script files.
Command Buttons
Remove File - Send the updated screen to the switch and perform the file remove.
11.2.1.9.9. Copying Running Configuration to Flash Page
Use this menu to copy a start-up configuration file from the running configuration file on switch.
Configurable Data
File Name - Enter the name you want to give the file being copied. You may enter up to 32
characters. The factory default is blank.
Non-Configurable Data
The last row of the table is used to display information about the progress of the file copy.
The screen will refresh automatically until the file copy completes.
Command Buttons
Copy to File - Send the updated screen to the switch perform the file copy.
To Next Page
Loading...