EasyManuals Logo

QUANTA LB4M User Manual

QUANTA LB4M
970 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #72 background imageLoading...
Page #72 background image
UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 72/970
a particular interface for which transmission is inhibited by more than one collision.
Excessive Collisions: A count of frames for which transmission on a particular interface
fails due to excessive collisions.
GVRP PDUs Received: The count of GVRP PDUs received in the GARP layer.
GVRP PDUs Transmitted: The count of GVRP PDUs transmitted from the GARP layer.
GVRP Failed and Registrations: The number of times attempted GVRP registrations could
not be completed.
GMRP PDUs received: The count of GMRP PDUs received in the GARP layer.
GMRP PDUs Transmitted: The count of GMRP PDUs transmitted from the GARP layer.
GMRP Failed Registrations: The number of times attempted GMRP registrations could not
be completed.
STP BPDUs Transmitted: Spanning Tree Protocol Bridge Protocol Data Units sent.
STP BPDUs Received: Spanning Tree Protocol Bridge Protocol Data Units received.
RSTP BPDUs Transmitted: Rapid Spanning Tree Protocol Bridge Protocol Data Units sent.
RSTP BPDUs Received: Rapid Spanning Tree Protocol Bridge Protocol Data Units
received.
MSTP BPDUs Transmitted: Multiple Spanning Tree Protocol Bridge Protocol Data Units
sent.
MSTP BPDUs Received: Multiple Spanning Tree Protocol Bridge Protocol Data Units
received.
EAPOL Frames Received: The number of valid EAPOL frames of any type that have been
received by this authenticator.
EAPOL Frames Transmitted: The number of EAPOL frames of any type that have been
transmitted by this authenticator.
Time Since Counters Last Cleared: The elapsed time, in days, hours, minutes, and
seconds since the statistics for this port were last cleared.
The display parameters when the argument is ‘switchport’ are as follows:
Total Packets Received (Octets): The total number of octets of data received by the
processor (excluding framing bits but including FCS octets).
Packets Received Without Error: The total number of packets (including broadcast
packets and multicast packets) received by the processor.
Unicast Packets Received: The number of subnetwork-unicast packets delivered to a
higher-layer protocol.
Multicast Packets Received: The total number of packets received that were directed to a
multicast address. Note that this number does not include packets directed to the broadcast
address.
Broadcast Packets Received: The total number of packets received that were directed to
the broadcast address. Note that this does not include multicast packets.
Receive Packets Discarded: The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent their being deliverable to a
higher-layer protocol. A possible reason for discarding a packet could be to free up buffer
space.
Octets Transmitted: The total number of octets transmitted out of the interface, including
framing characters.
Packets Transmitted without Errors: The total number of packets transmitted out of the
interface.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QUANTA LB4M and is the answer not in the manual?

QUANTA LB4M Specifications

General IconGeneral
BrandQUANTA
ModelLB4M
CategorySwitch
LanguageEnglish

Related product manuals