EasyManuals Logo

QUANTA LB4M User Manual

QUANTA LB4M
970 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #822 background imageLoading...
Page #822 background image
UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 822/970
Preference Level - Specify the preference level of the router as a default router relative
to other routers on the same subnet. Higher numbered addresses are preferred. You
must enter an integer.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. The changes will not be retained across a power cycle unless a save is
performed.
11.2.3.7.2. Viewing Router Discovery Status
Non-Configurable Data
Slot/Port - The router interface for which data is displayed.
Advertise Mode - The values are enable or disable. Enable denotes that Router
Discovery is enabled on that interface.
Advertise Address - The IP Address used to advertise the router.
Maximum Advertise Interval (secs) - The maximum time (in seconds) allowed between
router advertisements sent from the interface.
Minimum Advertise Interval (secs) - The minimum time (in seconds) allowed between
router advertisements sent from the interface.
Advertise Lifetime (secs) - The value (in seconds) used as the lifetime field in router
advertisements sent from the interface. This is the maximum length of time that the
advertised addresses are to be considered as valid router addresses by hosts.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QUANTA LB4M and is the answer not in the manual?

QUANTA LB4M Specifications

General IconGeneral
BrandQUANTA
ModelLB4M
CategorySwitch
LanguageEnglish

Related product manuals