Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 848/970
11.2.4.1.6. Defining Access Control User Login Page
Selection Criteria
Users - Selects the user name that will use the selected login list for 802.1x port security.
Configurable Data
Login - Selects the login to apply to the specified user. All configured logins are displayed.
Command Buttons
Submit - Sends the updated screen to the switch and causes the changes to take effect
on the switch but these changes will not be retained across a power cycle unless a save is
performed.
Refresh - Update the information on the page.
11.2.4.1.7. Defining each Port Access Privileges Page
Selection Criteria
Port - Selects the port to configure.
Configurable Data
Users - Selects the users that have access to the specified port or ports.
Command Buttons
Submit - Sends the updated screen to the switch and causes the changes to take effect
on the switch but these changes will not be retained across a power cycle unless a save is
performed.
Refresh - Update the information on the page.
To Next Page
Loading...