Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 876/970
11.2.5.7.5. Configuring DHCPv6 Interface Configuration Page
Configurable Data
Interface - Specifies interface configured for DHCPv6 server functionality.
Interface Mode - Specifies DHCPv6 mode to configure either server or relay functionality.
DHCPv6 server and DHCPv6 relay functions are mutually exclusive
Pool Name - Specifies the DHCPv6 pool containing stateless and/or prefix delegation
parameters.
Rapid Commit - Rapid commit is an optional parameter. Specified to allow abbreviated
exchange between the client and server.
Preference - Specifies the preference value used by clients to determine preference
between mulitple DHCPv6 servers. The values allowed are between 0 to 4294967295
Destination IP Address - Specifies an IPv6 address of a DHCPv6 relay server.
Relay Interface - Specifies an interface to reach a relay server.
Remote ID - Specifies the relay agent information option. Remote ID need to be derived
from the DHCPv6 server DUID and the relay interface number, or it can be specified as a
user defined string.
Command Buttons
Submit - Applies the new configuration and causes the changes to take effect. These
changes will not be retained across a power cycle unless a save configuration is
performed.
Delete - Deletes DHCPv6 configuration on selected interface.
To Next Page
Loading...
Need help?
General
