Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 888/970
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is
performed.
11.2.5.8.6. Viewing OSPFv3 Interface Statistics Page
This screen displays statistics for the selected interface. The information will be displayed only
if OSPFv3 is enabled.
Selection Criteria
Slot/Port - Select the interface for which data is to be displayed.
Non-Configurable Data
OSPFv3 Area ID - The OSPFv3 area to which the selected router interface belongs. An
OSPFv3 Area ID is a 32 bit integer in dotted decimal format that uniquely identifies the
area to which the interface connects.
Area Border Router Count - The total number of area border routers reachable within
this area. This is initially zero, and is calculated in each SPF Pass.
To Next Page
Loading...