Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 895/970
11.2.5.8.11. Viewing OSPFv3 Virtual Link Summary Page
Non-Configurable Data
Area ID - The Area ID portion of the virtual link identification for which data is to be
displayed. The Area ID and Neighbor Router ID together define the virtual link.
Neighbor Router ID - The neighbor portion of the virtual link identification. Virtual links
may be configured between any pair of area border routers having interfaces to a common
(non-backbone) area.
Hello Interval - The OSPFv3 hello interval for the virtual link in units of seconds.
Dead Interval - The OSPFv3 dead interval for the virtual link in units of seconds. This
determiness how long a router will wait to see a neighbor router's Hello packets before
declaring that the router is down.
Retransmit Interval - The OSPFv3 retransmit interval for the virtual link in units of
seconds. This specifies the time between link-state advertisements for adjacencies
belonging to this router interface. This value is also used when retransmitting database
descriptions and link-state request packets.
Iftransit Delay Interval - The OSPFv3 Transit Delay for the virtual link in units of seconds.
It specifies the estimated number of seconds it takes to transmit a link state update packet
over this interface.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...
Need help?
General
