Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010 L 235
8400 HighLine | Parameter setting & configuration
I/O terminals
Analog terminals
Parameterisation dialog in the »Engineer«:
Short overview of parameters for the analog terminals:
Button Function
Parameterising analog input
( 237)
Parameterising analog output
( 241)
Open the parameterising dialog for assigning application inputs to the analog input.
Changing the terminal assignment with the »Engineer«
( 249)
Parameter Info Lenze setting
Value Unit
Analog input 1
C00028/1 AIN1: Input voltage - V
C00029/1 AIN1: Input current - mA
C00033/1 AIN1: Output value (to application) - %
Analog input 2
C00028/2 AIN2: Input voltage - V
C00029/2 AIN2: Input current - mA
C00033/2 AIN2: Output value (to application) - %
Highlighted in grey = display parameter
efesotomasyon.com - Lenze
To Next Page
Loading...