8400 HighLine | Parameter setting & configuration
Technology applications
TA "Table positioning"
316 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
wState - -
wOut2 LA_TabPos.nGPSignalOut1_a Analog signal monitor: Output signal 1
• The selection of the signal source to output is executed in
C00410/1
.
• Gain and offset for the output signal can be
parameterised in C00413/1
and C00413/2.
• For a detailed functional description see
FB L_SignalMonitor_a
.
wOut3 - -
wOut4 - -
dnOut34_p LA_TabPos.dnSetPos_p Absolute position setpoint in [increments]
• 65535 [Increments] ≡ 1 motor revolution
• The position resolution, i.e. how many increments form
one unit, is displayed in C01205
.
Port block LP_CanOut2 / LP_CanOut3
bOut1_B0 - - (not used)
...
bOut1_B15
wOut1 -
wOut2 -
wOut3 -
wOut4 -
dnOut34_p -
Port Assignment Info
efesotomasyon.com - Lenze
To Next Page
Loading...