8400 HighLine | Parameter setting & configuration
Function library
Function blocks | L_Curve_1
944 L Firmware ≤ 05.00 - DMS 4.2 EN - 02/2010
If only one interpolation point, x1, is defined in the positive range, a line is
extrapolated:
[14-25] Example: Characteristic with only one defined interpolation point and x1 < 0
1 2 3 4 5 6 7 8 9
X
120 % 0 % 0 % 0 % 0 % 0 % 0 % 0 % 0 %
y(x)
40 %0 %0 %0 %0 %0 %0 %0 %0 %
nOut_a
nIn_a
x1, y1
-199.99 % / -199.99 %
199.99 % / 199.99 %
efesotomasyon.com - Lenze
To Next Page
Loading...