Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 126/970
<vlanId> - VLAN ID.
no - This command disables the status of the interface as a statically configured multicast
router interface.
Default Setting
Disabled
Command Mode
Interface Config.
6.2.6.2.9. ip igmp snooping vlan static
This command is used to add a port to a multicast group.
Syntax
ip igmp snooping vlan <vlanid> static <macaddr> interface <slot/port>
<vlanid> - VLAN ID (Range: 1 – 3965).
<macaddr> - Multicast group MAC address.
<slot/port> - Interface number.
Default Setting
None
Command Mode
Global Config
Command Usage
The maximum number of static router ports that can be configured is 64.
6.2.6.2.10. ip igmp snooping static
The user can go to the Global Mode and add a port to multicast group, use the ip igmp
snooping static Global command.
To Next Page
Loading...
Need help?
General
