Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 142/970
Ipv6 mld snooping groupmembershipinterval <2-3600>
no ipv6 mld snooping groupmembershipinterval
Default Setting
260
Command Mode
Global Configure
Interface Configure
6.2.8.2.5. ipv6 mld snooping max-response-time
The user can go to the CLI Interface Global/Interface Configuration Mode to set the MLD
Maximum Response time for the system, on a particular interface, use the ipv6 mld snooping
max-response-time <1-3599> global/interface configuration command. Use the no ipv6 mld
snooping max-response-time return to default value 10
Syntax
Ipv6 mld snooping max-response-time <1-3599>
no ipv6 mld snooping max-response-time
Default Setting
10
Command Mode
Global Configure
Interface Configure
6.2.8.2.6. ipv6 mld snooping mcrtrexpiretime
The user can go to the CLI Interface Global/Interface Configuration Mode to set the Multicast
Router Present Expiration time for the system or on a particular interface, use the ipv6 mld
snooping mcrtrexpiretime <0-3600> global/interface configuration command. Use the no
ipv6 mld snooping mcrtrexpiretime to return to default value 0.
Syntax
To Next Page
Loading...
Need help?
General
