Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 143/970
0
Command Mode
Global Configure
Interface Configure
6.2.8.2.7. ipv6 mld snooping mrouter interface
The user can go to the CLI Interface Configuration Mode to configure the interface as a
multicast router-attached interface or configure the VLAN ID for the VLAN that has the
multicast router attached mode enabled, use the ipv6 mld snooping mrouter interface
interface|<vlanId> interface configuration command. Use the no ipv6 mld snooping mrouter
interface|<vlanId> disable multicast router attached mode for the interface or a VLAN.
Syntax
Ipv6 mld snooping mrouter interface interface|<vlanId>
no ipv6 mld snooping mrouter interface|<vlanId>
Default Setting
None
Command Mode
Interface Configure
6.2.8.2.8. ipv6 mld snooping static
The user can go to the Global Mode and add a port to ipv6 multicast group, use the ipv6 mld
snooping static Global command.
Syntax
ipv6 mld snooping static <macaddr> vlan <vlan-id> interface <slot/port>
no ipv6 mld snooping static <macaddr> vlan <vlan-id> interface <slot/port>
Default Setting
None
Command Mode
Global Mode
To Next Page
Loading...
Need help?
General
