Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 144/970
6.2.8.2.9. set mld
The user can go to the CLI VLAN Mode to set MLD Snooping on a particular VLAN, use the set
mld <vlanid> vlan configuration command. Use the no set mld <vlanid> to disable MLD
Snooping on a particular VLAN.
Syntax
set mld <vlanid>
no set mld <vlanid>
Default Setting
Disable
Command Mode
VLAN Mode
6.2.8.2.10. set mld fast-leave
The user can go to the CLI VLAN Configuration Mode to set MLD Snooping fast-leave admin
mode on a particular VLAN, use the set mld fast-leave <vlanid> vlan configuration command.
Use the no set mld fast-leave <vlanid> disable MLD Snooping fast-leave admin mode.
Syntax
set mld fast-leave <vlanid>
no set mld fast-leave <vlanid>
Default Setting
Disable
Command Mode
VLAN Mode
6.2.8.2.11. set mld groupmembership-interval
The user can go to the CLI VLAN Configuration Mode to set the MLD Group Membership
Interval time on a particular VLAN, use the set mld groupmembership-interval <vlanid>
<2-3600> vlan configuration command. Use the no set mld groupmembership-interval
<vlanid> return to default value 260.
Syntax
set mld groupmembership-interval <vlanid> <2-3600>
no set mld groupmembership-interval <vlanid>
To Next Page
Loading...
Need help?
General
