Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 145/970
Default Setting
260
Command Mode
VLAN Mode
6.2.8.2.12. set mld maxresponse
The user can go to the CLI Interface VLAN Mode to set the MLD Maximum Response time on
a particular VLAN, use the set mld max-response-time <vlanid> <1-3599> vlan configuration
command. Use the no set mld max-response-time <vlanid> return to default value 10.
Syntax
set mld max-response-time <vlanid> <1-3599>
no set mld max-response-time <vlanid>
Default Setting
10
Command Mode
VLAN Mode
6.2.8.2.13. set ipv6 mld mcrtrexpiretime
The user can go to the CLI Interface VLAN Configuration Mode to set the Multicast Router
Present Expiration time on a particular VLAN, use the set mld mcrtrexpiretime <vlanid>
<0-3600> vlan configuration command. Use the no set mld mcrtrexpiretime <vlanid> to
return to default value 0.
Syntax
set mld mcrtrexpiretime <vlanid> <0-3600>
no set mld mcrtrexpiretime <vlanid>
Default Setting
0
Command Mode
VLAN Mode
To Next Page
Loading...
Need help?
General
