Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 197/970
Syntax
snmp-server enable traps ospf
no snmp-server enable traps ospf
no - This command disables OSPF trap.
Default Setting
Enabled
Command Mode
Global Config
This command enables OSPFv3 traps.
Syntax
snmp-server enable traps ospfv3
no snmp-server enable traps ospfv3
no - This command disables OSPFv3 trap.
Default Setting
Enabled
Command Mode
Global Config
This command enables PIM traps.
Syntax