QUANTA LB4M - Page 198

UANTA COMPUTER INC.
Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 198/970
snmp-server enable traps pim
no snmp-server enable traps pim
no - This command disables PIM trap.
Default Setting
Enabled
Command Mode
Global Config
This command enables the sending of new root traps and topology change notification traps.
Syntax
snmp-server enable traps stpmode
no snmp-server enable traps stpmode
no - This command disables the sending of new root traps and topology change
notification traps.
Default Setting
Enabled
Command Mode
Global Config
This command Enables/Disables SNMP violation traps for interface.
Syntax
snmp-server enable traps violation
no snmp-server enable traps violation
no - This command disables the sending of violation traps notification traps.