Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 638/970
11.2.1.3.9. Defining User Accounts Page
By default, two user accounts exist:
admin, with 'Read/Write' privileges
guest, with 'Read Only' privileges
By default, both of these accounts have blank passwords. The names are not case sensitive.
If you logon with a user account with 'Read/Write' privileges (that is, as admin) you can use the
User Accounts screen to assign passwords and set security parameters for the default
accounts, and to add and delete accounts (other than admin) up to the maximum of six. Only a
user with 'Read/Write' privileges may alter data on this screen, and only one account may be
created with 'Read/Write' privileges.
Selection Criteria
User Name Selector - You can use this screen to reconfigure an existing account, or to
create a new one. Use this pulldown menu to select one of the existing accounts, or select
'Create' to add a new one, provided the maximum of five 'Read Only' accounts has not
been reached.
Configurable Data
User Name - Enter the name you want to give to the new account. (You can only enter
data in this field when you are creating a new account.) User names are up to eight
characters in length and are not case sensitive. Valid characters include all the
alphanumeric characters as well as the dash ('-') and underscore ('_') characters.
Password - Enter the optional new or changed password for the account. It will not display
as it is typed, only asterisks (*) will show. Passwords are up to eight alpha numeric
characters in length, and are case sensitive.
Confirm Password - Enter the password again, to confirm that you entered it correctly.
This field will not display, but will show asterisks (*).
Authentication Protocol - Specify the SNMPv3 Authentication Protocol setting for the
selected user account. The valid Authentication Protocols are None, MD5 or SHA. If you
select None, the user will be unable to access the SNMP data from an SNMP browser. If
To Next Page
Loading...
Need help?
General
