Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 657/970
Flow Control - Indicates the status of flow control on this port.
Packet Burst - Indicates the packet burst used in the rate limit function if the rate limit
admin mode is enabled.
Broadcast Storm Control - Indicates the status of the broadcast storm control, disable or
Level 1, Level 2, Level 3, Level 4.
Multicast Storm Control - Indicates the status of the multicast storm control, disable or
Level 1, Level 2, Level 3, Level 4.
Unicast Storm Control - Indicates the status of the unicast storm control, disable or Level
1, Level 2, Level 3, Level 4.
Capability - Indicates the port capabilities during auto-negotiation.
Command Buttons
Refresh – Refresh the configuration value again.
11.2.1.6.3. Configuring Port Description Function Page
This screen configures and displays the description for all ports in the box.
To Next Page
Loading...
Need help?
General
