Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 658/970
Selection Criteria
Slot/Port - Selects the interface for which data is to be displayed or configured.
Configurable Data
Port Description Enter the Description string to be attached to a port. It can be up to 64
characters in length.
Non-Configurable Data
Slot/Port - Identifies the port
Physical Address - Displays the physical address of the specified interface.
PortList Bit Offset - Displays the bit offset value which corresponds to the port when the
MIB object type PortList is used to manage in SNMP.
IfIndex - Displays the interface index associated with the port.
Port Desciption - Description string attached to a port. It can be of up to 64 characters in
length.
Command Buttons
Submit - Send the updated screen to the switch and cause the changes to take effect on
the switch.
Refresh - Refresh the data on the screen with present state of data in the switch.
To Next Page
Loading...
Need help?
General
