Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 694/970
11.2.1.11.5. Configuring Current Time Settings Page
Configurable Data
Year - Year (4-digit). (Range: 2000 - 2099).
Month - Month. (Range: 1 - 12).
Day - Day of month. (Range: 1 - 31).
Hour - Hour in 24-hour format. (Range: 0 - 23).
Minute - Minute. (Range: 0 - 59).
Second - Second. (Range: 0 - 59).
Command Buttons
Submit - Send the updated screen to the switch. Changes take effect on the switch but
these changes will not be retained across a power cycle unless a save is performed.
11.2.1.11.6. Configuring Time Zone Settings Page
Simple Network Time Protocol (SNTP) allows the switch to set its internal clock based on
periodic updates from a time server. Maintaining an accurate time on the switch enables the
system log to record meaningful dates and times for event entries. You can also manually set
the clock using the CLI. If the clock is not set, the switch will only record the time from the
factory default set at the last bootup.
Configurable Data
Time Zone Name - The name of time zone, usually an acronym. (Range: 1-15
characters).
To Next Page
Loading...