Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 702/970
11.2.2.3.1. Configuring Port-based VLAN Configuration Page
Selection Criteria
VLAN ID and Name - You can use this screen to reconfigure an existing VLAN, or to
create a new one. Use this pull down menu to select one of the existing VLANs, or select
'Create' to add a new one.
Configurable Data
VLAN ID - Specify the VLAN Identifier for the new VLAN. (You can only enter data in this
field when you are creating a new VLAN.) The range of the VLAN ID is (1 to 3965).
VLAN Name - Use this optional field to specify a name for the VLAN. It can be up to 32
alphanumeric characters, including blanks. The default is blank. VLAN ID 1 always has a
name of 'Default'.
VLAN Type - This field identifies the type of the VLAN you are configuring. You cannot
change the type of the default VLAN (VLAN ID = 1): it is always type 'Default'. When you
create a VLAN, using this screen, its type will always be 'Static'. A VLAN that is created by
GVRP registration initially has a type of 'Dynamic'. You may use this pull down menu to
change its type to 'Static'.
Participation - Use this field to specify whether a port will participate in this VLAN. The
factory default is 'Autodetect'. The possible values are:
Include - This port is always a member of this VLAN. This is equivalent to
registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is equivalent to
registration forbidden in the IEEE 802.1Q standard.
Autodetect - Specifies that port may be dynamically registered in this VLAN via
GVRP. The port will not participate in this VLAN unless it receives a GVRP
request. This is equivalent to registration normal in the IEEE 802.1Q standard.
Tagging - Select the tagging behavior for this port in this VLAN. The factory default is
'Untagged'. The possible values are:
Tagged - all frames transmitted for this VLAN will be tagged.
Untagged - all frames transmitted for this VLAN will be untagged.
Non-Configurable Data
Slot/Port - Indicates which port is associated with the fields on this line.
Status - Indicates the current value of the participation parameter for the port.
Command Buttons
Submit - Update the switch with the values on this screen. If you want the switch to retain
the new values across a power cycle, you must perform a save.
Delete - Delete this VLAN. You are not allowed to delete the default VLAN.
To Next Page
Loading...