Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 776/970
DSCP
- Specifies the DSCP associated with a particular policy type.
Unknown Bit Status - Specifies the unknown bit associated with a particular policy
type.
Tagged Bit Status - Specifies the tagged bit associated with a particular policy type.
Inventory Information
- Specifies if location TLV is received in LLDP frames on this port.
Hardware Revision
- Specifies hardware version of the remote device.
Firmware Revision - Specifies Firmware version of the remote device.
Software Revision - Specifies Software version of the remote device.
Serial Number - Specifies serial number of the remote device.
Manufacturer Name - Specifies manufacturers name of the remote device.
Model Name - Specifies model name of the remote device.
Asset ID - Specifies asset id of the remote device.
Location Information
- Specifies if location TLV is received in LLDP frames on this port.
Sub Type - Specifies type of location information.
Location Information - Specifies the location information as a string for given type
of location id.
Extended PoE
- Specifies if remote device is a PoE device.
Device Type - Specifies remote device's PoE device type connected to this port.
Extended PoE PSE - Specifies if extended PSE TLV is received in LLDP frame on this
port.
Available - Specifies the remote ports PSE power value in tenths of watts.
Source
-
Specifies the remote ports PSE power source.
Priority - Specifies the remote ports PSE power priority.
Extended PoE PD - Specifies if extended PD TLV is received in LLDP frame on this port.
Required - Specifies the remote port's PD power requirement.
Source
-
Specifies the remote port's PD power source.
To Next Page
Loading...
Need help?
General
