Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 793/970
Delete Stub Area - Delete the stub area designation. The area will be returned to normal
state.
Create NSSA - Configure the area ads a NSSA
Delete NSSA - Delete the DSSA. The area will e returned to normal state.
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is
performed.
11.2.3.3.3. Viewing Stub Area Summary Information
Non-Configurable Data
Area ID - The Area ID of the Stub area
Type of Service - The type of service associated with the stub metric. The switch
supports Normal only.
Metric Value - Set the metric value you want applied for the default route advertised into
the area. Valid values range from 1 to 16,777,215.
Import Summary LSAs - Whether the import of Summary LSAs is enabled or disabled.
Command Buttons
Refresh - Refresh the data on the screen to the current values from the switch.
To Next Page
Loading...