Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 843/970
machine on this port to define periods of time in which it will not attempt to acquire a
supplicant. The quiet period is the period for which the authenticator does not attempt to
acquire a supplicant after a failed authentication exchange with the supplicant. The quiet
period is a number in the range of 0 and 65535.
Transmit Period(secs) - This field displays the configured transmit period for the selected
port. The transmit period is the value, in seconds, of the timer used by the authenticator
state machine on the specified port to determine when to send an EAPOL EAP
Request/Identity frame to the supplicant. The transmit period is a number in the range of 1
to 65535.
Guest VLAN ID(secs) - This field displays the configured guest Vlan ID for the selected
port. The guest Vlan ID is a value of 0 to 3965.
Guest VLAN Period(secs) - This field displays the configured guest Vlan period for the
selected port. The guest Vlan period is the value, in seconds, of the timer used by the
GuestVlan Authentication. The guest Vlan period is a number in the range of 1 and 300.
Supplicant Timeout(secs) - This field displays the configured supplicant timeout for the
selected port. The supplicant timeout is the value, in seconds, of the timer used by the
authenticator state machine on this port to timeout the supplicant. The supplicant timeout
is a value in the range of 1 to 65535.
Server Timeout(secs) - This field displays the configured server timeout for the selected
port. The server timeout is the value, in seconds, of the timer used by the authenticator on
this port to timeout the authentication server. The server timeout is a value in the range of
1 to 65535.
Maximum Requests - This field displays the configured maximum requests for the
selected port. The maximum requests value is the maximum number of times the
authenticator state machine on this port will retransmit an EAPOL EAP Request/Identity
before timing out the supplicant. The maximum requests value is in the range of 1 to 10.
Reauthentication Period(secs) - This field displays the configured reauthentication
period for the selected port. The reauthentication period is the value, in seconds, of the
timer used by the authenticator state machine on this port to determine when
reauthentication of the supplicant takes place. The reauthentication period is a value in the
range of 1 to 65535.
Reauthentication Enabled - This field displays if reauthentication is enabled on the
selected port. This is a configurable field. The possible values are 'true' and 'false'. If the
value is 'true' reauthentication will occur. Otherwise, reauthentication will not be allowed.
Control Direction - This displays the control direction for the specified port. The control
direction dictates the degree to which protocol exchanges take place between Supplicant
and Authenticator. This affects whether the unauthorized controlled port exerts control
over communication in both directions (disabling both incoming and outgoing frames) or
just in the incoming direction (disabling only the reception of incoming frames). This field is
not configurable on some platforms.
Protocol Version - This field displays the protocol version associated with the selected
port. The only possible value is 1, corresponding to the first version of the 802.1x
specification. This field is not configurable.
PAE Capabilities - This field displays the port access entity (PAE) functionality of the
selected port. Possible values are "Authenticator" or "Supplicant". This field is not
configurable.
To Next Page
Loading...
Need help?
General
