Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 970/970
11.2.7.6.8. Configuring PIM-SM Static RP Configuration Page
Configurable Data
IP Address - IP Address of the RP to be created or deleted.
Group - Group Address of the RP to be created or deleted.
Group Mask - Group Mask of the RP to be created or deleted.
Command Buttons
Submit - Attempts to create the specified static RP IP Address for the PIM-SM router.
Configuration changes take effect immediately. These changes will not be retained across
a power cycle unless a save is performed.
Delete - Attempts to remove the specified static RP IP Address for the PIM-SM router.
Configuration changes take effect immediately. These changes will not be retained across
a power cycle unless a save is performed.
To Previous Page
Loading...