Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 920/970
VLAN ID - Specifies list of all configured VLAN Id(s) for ACL mapping.
Direction - Specifies the packet filtering direction for ACL.
Valid Directions
Inbound
ACL Type - Specifies the type of ACL.
Valid ACL Types
IP ACL
IPv6 ACL
MAC ACL
IP ACL - Specifies list of all IP ACLs. This field is visible only if the user has selected "IP
ACL" as "ACL Type".
IPv6 ACL - Specifies list of all IPv6 ACLs. This field is visible only if the user has selected
"IPv6 ACL" as "ACL Type".
MAC ACL - Specifies list of all MAC ACLs. This field is visible only if the user has
selected "MAC ACL" as "ACL Type".
Sequence Number - An optional sequence number may be specified to indicate the
order of this access list relative to other access lists already assigned to this VLAN and
direction. A lower number indicates higher precedence order. If a sequence number is
already in use for this VLAN and direction, the specified access list replaces the currently
attached access list using that sequence number. If the sequence number is not specified
by the user, a sequence number that is one greater than the highest sequence number
currently in use for this VLAN and direction will be used. Valid range is (1 to
4294967295).
Non-Configurable Data
Slot/Port - Displays selected interface
VLAN ID(s) - Displays selected VLAN Id.
Direction - Displays selected packet filtering direction for ACL.
ACL Type - Displays the type of ACL assigned to selected VLAN and direction.
ACL Identifier - Displays the ACL Number(in case of IP ACL) or ACL Name(in case of
IPv6 ACL and MAC ACL) identifying the ACL assigned to selected VLAN and direction.
Sequence Number - Displays the Sequence Number signifying the order of specified
To Next Page
Loading...
Need help?
General
