Layer 2,3,IPv6+QoS Switch
_____________________________________________________________________________
Layer 2,3,IPv6+QoS Network Switch User Manual Version 0.1 Page: 934/970
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is
performed.
Restore Defaults - Restores default settings.
11.2.6.4.3. Configuring CoS interface
Selection Criteria
Slot/Port - Specifies all CoS configurable interfaces. The option "Global" represents the
most recent global configuration settings. These may be overridden on a per-interface
basis.
Configurable Data
Interface Shaping Rate - Specifies the maximum bandwidth allowed, typically used to
shape the outbound transmission rate. This value is controlled independently of any
per-queue maximum bandwidth configuration. It is effectively a second-level shaping
mechanism. Default value is 0. Valid Range is (0 to 100) in increments of 5 . The value 0
means maximum is unlimited.
Command Buttons
Restore Defaults - Restores default settings.
To Next Page
Loading...