System Integration Unit (SIU)
MPC5566 Microcontroller Reference Manual, Rev. 2
6-54 Freescale Semiconductor
6.3.1.63 Pad Configuration Registers 97 (SIU_PCR97)
The SIU_PCR97 registers control the function, direction, and electrical attributes of
PCSA[1]_PCSB[2]_GPIO[97]. This register allows selection of the PCSA[1], PCSB[2] and GPIO
functions.
Figure 6-64. PCSA[1]_PCSB[2]_GPIO[97] Pad Configuration Register (SIU_PCR97)
Refer to Table 6-19 for bit field definitions. Table 6-63 lists the PA fields for
PCSA[1]_PCSB[2]_GPIO[97].
6.3.1.64 Pad Configuration Register 98 (SIU_PCR98)
The SIU_PCR98 register controls the function, direction, and electrical attributes of
PCSA[2]_SCKD_GPIO[98]. This register allows selection of the PCSA[2], SCKD, and GPIO functions.
Figure 6-65. PCSA[2]_SCKD_GPIO[98] Pad Configuration Register (SIU_PCR98)
Address: Base + 0x0102 Access: R/W
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0
PA
1
1
The PCSA[1] function is available on the MPC5566 only.
OBE
2
2
When configured as PCSA[1] or PCSB[2], the OBE bit has no effect. When configured as GPDO, set the OBE bit to 1.
IBE
3
3
When the pad is configured as an output, set the IBE bit to 1 to show the pin state in the GPDI register.
Clear the IBE bit to 0 to reduce power consumption. When configured as GPDI, set the IBE bit to 1.
0 0
ODE HYS SRC WPE WPS
W
RESET: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1
Table 6-63. PCR97 PA Field Definitions
PA Field Pin Function
0b00 GPIO[97]
0b01 PCSA[1]
0b10 PCSB[2]
0b11 PCSA[1]
Address: Base + 0x0104 Access: R/W
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0
PA
1
1
The PCSA[2] function is available on the MPC5566 only.
OBE
2
2
When configured asPCSA[2] or SCKD, the OBE bit has no effect. When configured as GPDO, set the OBE bit to 1.
IBE
3
3
When the pad is configured as an output, set the IBE bit to 1 to show the pin state in the GPDI register.
Clear the IBE bit to 0 to reduce power consumption. When configured as GPDI, set the IBE bit to 1.
0 0
ODE HYS SRC WPE WPS
W
RESET: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1