Enhanced Queued Analog-to-Digital Converter (eQADC)
MPC5566 Microcontroller Reference Manual, Rev. 2
19-30 Freescale Semiconductor
19.3.2.11 eQADC CFIFO Status Register (EQADC_CFSR)
The EQADC_CFSR contains the current CFIFO status. The EQADC_CFSRs are read only. Writing to the
EQADC_CFSR has no effect.
17–20
LCFTSSI
[0:3]
Last CFIFO to transfer commands through the eQADC SSI. Holds the CFIFO number of last CFIFO to have
initiated a command transfer to an external command buffer through the eQADC SSI. LCFTSSI does not
indicate the transmission of null messages. LCFTSSI has the following values:
21–31
TC_LCFTSSI
[0:10]
Transfer counter for last CFIFO to transfer commands through eQADC SSI. Indicates the number of commands
which have been completely transferred from a particular CFIFO at the time a command transfer from that
CFIFO to an external command buffer is initiated. TC_LCFTSSI is a copy of the corresponding TC_CFn in
EQADC_CFTCRn (see Section 19.3.2.9, “eQADC CFIFO Transfer Counter Registers 0–5 (EQADC_CFTCRn)”)
captured at the time a command transfer to an external command buffer is initiated. This field has no meaning
when LCFTSSI is 0b1111.
Address: Base + 0x00AC Access: RO
0123456789101112131415
RCFS0 CFS1 CFS2 CFS3 CFS4 CFS5 0000
W
Reset0000000000000000
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
R0000000000000000
W
Reset0000000000000000
Figure 19-14. eQADC CFIFO Status Register (EQADC_CFSR)
Table 19-16. EQADC_CFSSR2 Field Descriptions (continued)
Field Description
LCFTSSI[0:3] LCFTSSI Meaning
0b0000 Last command was transferred from CFIFO0
0b0001 Last command was transferred from CFIFO1
0b0010 Last command was transferred from CFIFO2
0b0011 Last command was transferred from CFIFO3
0b0100 Last command was transferred from CFIFO4
0b0101 Last command was transferred from CFIFO5
0b0110 – 0b1110 Reserved
0b1111 No command was transferred to an external command buffer
To Next Page
Loading...
