NXP Semiconductors MPC5566 - Pad Configuration Register 137 (SIU_PCR137)

System Integration Unit (SIU)
MPC5566 Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 6-73
Refer to Table 6-19 for bit field definitions. Table 6-91 lists the PA fields for
ETPUA[22]_IRQ[10]_GPIO[136].
6.3.1.92 Pad Configuration Register 137 (SIU_PCR137)
The SIU_PCR137 register controls the function, direction, and electrical attributes of
ETPUA[23]_IRQ[11]_GPIO[137]. Both the input and output channels of ETPUA[23] are connected.
Figure 6-93. ETPUA[23]_IRQ[11]_GPIO[137] Pad Configuration Register (SIU_PCR137)
Refer to Table 6-19 for bit field definitions. Table 6-92 lists the PA fields for
ETPUA[23]_IRQ[11]_GPIO[137].
Table 6-91. PCR136 PA Field Definitions
PA Field Pin Function
0b00 GPIO[136]
0b01 ETPUA[22]
0b10 IRQ[10]
0b11 ETPUA[22]
Address: Base + 0x0152 Access: R/W
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0
PA OBE
1
1
When configured as IRQ[11], the OBE bit has no effect. The OBE bit must be set to one for ETPUA[23] or GPIO[137] when
configured as outputs.
IBE
2
2
When the pad is configured as an output, set the IBE bit to 1 to show the pin state in the GPDI register. Clear the IBE bit to 0
to reduce power consumption. The IBE bit must be set to 1 for ETPUA[23] or GPIO[137] when configured as inputs.
0 0
ODE HYS SRC WPE WPS
W
RESET: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 U
3
3
The weak pullup/down selection at reset for the ETPUA[23] pin is determined by the WKPCFG pin.
Table 6-92. PCR137 PA Field Definitions
PA Field Pin Function
0b00 GPIO[137]
0b01 ETPUA[23]
0b10 IRQ
[11]
0b11 ETPUA[23]