Flash Memory
MPC5566 Microcontroller Reference Manual, Rev. 2
13-6 Freescale Semiconductor
13.3.1 Flash Memory Map
Table 13-3 shows the flash array memory map and how it is mapped using byte addressing.
Base addresses for the device are the following:
• Shadow base address = 0x00FF_FC00
• Array base address = 0x0000_0000
• Control registers base address = 0xC3F8_8000
Table 13-3. Module Flash Array Memory Map
Byte Address Type and Amount of Space Used Access
Shadow base + (0x0000_0000–0x0000_03FF) Shadow block space (1024 bytes) User
Array base + (0x0000_0000–0x0003_FFFF) Low address space (256 KB) User
Array base + (0x0004_0000–0x0007_FFFF) Mid address space (256 KB) User
Array base + (0x0008_0000–0x2F00_FFFF) High address space (2.5 MB) User
To Next Page
Loading...
