NXP Semiconductors MPC5566 - Pad Configuration Register 229 (SIU_PCR229)

System Integration Unit (SIU)
MPC5566 Microcontroller Reference Manual, Rev. 2
6-96 Freescale Semiconductor
6.3.1.132 Pad Configuration Register 229 (SIU_PCR229)
The SIU_PCR229 register controls the enabling/disabling and drive strength of CLKOUT. CLKOUT is
enabled and disabled by setting and clearing the OBE bit. CLKOUT is enabled during reset.
Figure 6-133. CLKOUT Pad Configuration Register (SIU_PCR229)
6.3.1.133 Pad Configuration Register 230 (SIU_PCR230)
The SIU_PCR230 register controls the slew rate of RSTOUT.
Figure 6-134. RSTOUT Pad Configuration Register (SIU_PCR230)
6.3.1.134 Pad Configuration Register 231–255 (SIU_PCR231–SIU_PCR255)
The SIU_PCR231–SIU_PCR255 registers are not implemented in this device.
6.3.1.135 Pad Configuration Register 256 (SIU_PCR256)
The SIU_PCR256 register controls the function, direction, and electrical attributes of CAL_CS[0].
Figure 6-135. CAL_CS[0] Pad Configuration Register (SIU_PCR256)
Refer to Table 6-19 for bit field definitions. Table 6-123 lists the PA fields for CAL_CS[0].
Address: Base + 0x020A Access: R/W
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0 0 0
OBE
0
DSC
0 0 0 0 0 0
W
RESET: 0 0 0 0 0 0 1 0 1 1 0 0 0 0 0 0
Address: Base + 0x020C Access: R/W
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0 0 0 0 0 0 0 0 0
SRC
0 0
W
RESET: 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0
Address: Base + 0x0240 Access: R/W
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 0 0 0 0 0
PA
0 0
DSC
0 0 0 0 0 0
W
RESET: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Table 6-123. PCR256 PA Field Definition
PA Field Pin Function
0b0 Invalid value
0b1 CAL_CS[0]