NXP Semiconductors MPC5566 - Page 852

Enhanced Queued Analog-to-Digital Converter (eQADC)
MPC5566 Microcontroller Reference Manual, Rev. 2
Freescale Semiconductor 19-49
8–11
MESSAGE_
TAG
[0:3]
MESSAGE_TAG field. Allows the eQADC to separate returning results into different RFIFOs. When the eQADC
transfers a command, the MESSAGE_TAG is included as part of the command. Eventually the external
device/on-chip ADC returns the result with the same MESSAGE_TAG. The eQADC separates incoming
messages into different RFIFOs by decoding the MESSAGE_TAG of the incoming data.
12–13
LST
[0:1]
Long sampling time. These two bits determine the duration of the sampling time in ADC clock cycles.
Note: For external mux mode, 64 or 128 sampling cycles is recommended.
14
TSR
Time stamp request. TSR indicates the request for a time stamp. When TSR is asserted, the on-chip ADC control
logic returns a time stamp for the current conversion command after the conversion result is sent to the RFIFOs.
Refer to Section 19.4.5.3, “Time Stamp Feature,” for details.
0 Return conversion result only.
1 Return conversion time stamp after the conversion result.
15
FMT
Conversion data format. FMT specifies to the eQADC how to format the 12-bit conversion data returned by the
ADCs into the 16-bit format which is sent to the RFIFOs. Refer to Section , “ADC Result Format for On-Chip ADC
Operation,” for details.
0 Right justified unsigned.
1 Right justified signed.
Table 19-34. On-Chip ADC Field Descriptions: Conversion Command Message Format (continued)
Field Description
MESSAGE_TAG[0:3] MESSAGE_TAG Meaning
0b0000 Result is sent to RFIFO 0
0b0001 Result is sent to RFIFO 1
0b0010 Result is sent to RFIFO 2
0b0011 Result is sent to RFIFO 3
0b0100 Result is sent to RFIFO 4
0b0101 Result is sent to RFIFO 5
0b0110–0b0111 Reserved
0b1000 Null message received
0b1001 Reserved for customer use.
1
1
These messages are treated as null messages. Therefore, they must obey the
format for incoming null messages and return valid BUSY0/1 fields. Refer to
Section , “Null Message Format for External Device Operation.”
0b1010 Reserved for customer use.
1
0b1011–0b1111 Reserved
LST[0:1]
Sampling cycles
(ADC Clock Cycles)
0b00 2
0b01 8
0b10 64
0b11 128