Chapter 3
Device Management
RUGGEDCOM ROX II
User Guide
152 Managing WAN Interfaces
Figure 158: CDMA Profile Form (Example)
1. Connect List
11. Configure the following parameter(s) as required:
Parameter Description
Connect Selects the gsm profile to connect to wireless network. The gsm profile is configured in /
global/cellular/profiles/gsm
12. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
13. Click Exit Transaction or continue making changes.
Section 3.24
Managing WAN Interfaces
The following sections describe how to configure and manage WAN interfaces:
• Section 3.24.1, “Viewing a List of WAN Interfaces”
• Section 3.24.2, “Configuring a WAN Interface”
• Section 3.24.3, “Viewing WAN Statistics”
• Section 3.24.4, “Clearing WAN Statistics”
• Section 3.24.5, “Performing a Loopback Test”
• Section 3.24.6, “Configuring a T1 Line”
• Section 3.24.7, “Configuring an E1 Line”
• Section 3.24.8, “Configuring DDS”
• Section 3.24.9, “Managing Channels”
• Section 3.24.10, “Configuring an HDLC-ETH Connection”
• Section 3.24.11, “Configuring a Multi Link PPP Connection”
• Section 3.24.12, “Configuring a PPP Connection”
• Section 3.24.13, “Configuring a Frame Relay Connection”
• Section 3.24.14, “Managing Data Links for Frame Relay Connections”
To Next Page
Loading...
