Siemens RX1500

RUGGEDCOM ROX II
User Guide
Chapter 3
Device Management
Enabling/Disabling the NETCONF Summary Log 47
CAUTION!
Configuration hazard – risk of reduced performance. Enabling diagnostic logging will significantly affect
the performance of ROX II. Only enable diagnostic logging when directed by Siemens.
To enable or disable the SNMP log, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin » logging » diagnostics. The SNMP Log form appears.
Figure 36: SNMP Log Form
1. Enabled Check Box
3. Configure the following parameter(s) as required:
Parameter Description
Enabled Default: false
Enables/Disables SNMP logging to the snmp-trace.log.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 3.9.3.3
Enabling/Disabling the NETCONF Summary Log
The NETCONF summary log briefly records NETCONF protocol transactions and, in particular, those which
completed successfully.
CAUTION!
Configuration hazard – risk of reduced performance. Enabling diagnostic logging will significantly affect
the performance of ROX II. Only enable diagnostic logging when directed by Siemens.
To enable or disable the NETCONF Summary log, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin » logging » diagnostics. The NETCONF Summary Log form appears.