RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Deleting a Redistribution Metric 531
Parameter Description
Metric Type Default: 2
The OSPF exterior metric type for redistributed routes.
Metric The metric for redistributed routes.
Route Map The route map name.
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.21.8.3
Deleting a Redistribution Metric
To delete a redistribution metric for dynamic OSPF routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » ospf » redistribute. The Redistribute From Other Routing Protocols
table appears.
Figure 615: Redistribute From Other Routing Protocols Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen metric.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.21.9
Managing Routing Interfaces
The following sections describe how to configure and manage routing interfaces for dynamic OSPF routes:
• Section 5.21.9.1, “Viewing a List of Routing Interfaces”
• Section 5.21.9.2, “Configuring a Routing Interface”
To Next Page
Loading...
