RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Configuring Subnet Options 325
4. Click Add to create the new subnet. The Subnet Configuration form appears.
Figure 346: Subnet Configuration Form
1. Network IP Box 2. Shared Network List
5. Configure the following parameter(s) as required:
Parameter Description
network-ip The network IP address for this subnet.
shared-network The shared-network that this subnet belongs to.
6. Configure the options for the subnet. For more information, refer to Section 5.15.7.3, “Configuring Subnet
Options”
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.7.3
Configuring Subnet Options
To configure options for a subnet, do the following:
NOTE
Options set at the subnet level override options set at the DHCP server level.
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » subnet » {name} » options, where {name} is the name of the subnet.
The Leased Configuration and Client Configuration forms appear.
To Next Page
Loading...
